Tightness issues are common with a grandfather clock, which can be easily fixed. If you ever come across such situations, the first thing to do is unwind the pendulum. It may allow the timepiece to work properly once again. There are several steps associated with fixing the would-to-tight issue. By following these steps, you can effectively resolve the issue. If you are still unsure about fixing the grandfather clock, it is best to contact a clock repair service.
Ways to Fix Grandfather Clock Wound-to-Tight Issue
Stop the Pendulum For a Few Minutes
When there is this issue with the grandfather clock, it may not be able to maintain accurate time. On occasion, the clock may run slowly or lose track of time completely. Experts may recommend stopping the pendulum. Lifting off the bearings, it is better to let it slide freely without touching the wheels or gears. Releasing the weight at once or removing the weight pin can be a good option if it is not too heavy.
When the pendulum stops for about five minutes, it allows for the effective removal of the bottom board of the grand clock. After removing the screw, it is best to keep it in a safe place. It may save it from losing or damaging these parts. It is better to lose the four corners for the removal of the baseboards.
Get Rid of the Pendulum and Pendulum Rod
Following the removal of the bottom board, it is better to concentrate on detaching the pendulum and rod from their original space. On occasion, it becomes necessary to remove a couple of screws at each end of the pendulum rod.
Use a Rubber Band Close to the Weight Shaft
Thanks to the removal of all these elements, it is better to place a rubber band around the weight shaft, retaining enough tension. This may result in a slightly higher total weight. Now, it may be the right time to replace the pendulum and bottom board, along with the rubber band. Due to a weight in place, it becomes possible to complete the process effectively. Post-servicing may allow the grandfather clock to run faster.
Place a Minimum of Three Rags Between the Dial and the Weight Shaft
If the clock is not running fast now, it may be ideal to place three folded pieces of paper or three rags on the location. It is better to keep them between the pendulum rod and the dial. During this slowing down, the movement can be observed to keep time accurately. Still, it may not be worth losing more than three minutes a day.
Utilise Small-Headed Needles for Adjusting the Regulator
If the grandfather clock has a metal regulator, it is better to use small-headed needles or steel paper clips instead. It may work when there is a minimum of four of them. On occasion, it may be easier to turn the screws.
A grandfather clock is a common piece in many homes and offices. It is essential to take care of them properly. The methods explained above can help fix the issues. If the issue persists, please contact Clock-a-Holics for clock repair services.